JUKI MEB-3200
JUKI MEB-3200 Overview
The electronically controlled machine permits the selection and setting of various eyelet shapes. With its new technology called “active tension”, the machine is capable of duplicating the same sewing conditions with ease.
| Model name | MEB-3200SS | MEB-3200RS | MEB-3200JS | MEB-3200CS |
|---|---|---|---|---|
| Thread trimming style | Longer remaining thread | Shorter remaining thread | ||
| Sewing speed | 400～2,200rpm (100rpm step) | |||
| Sewing length | 10～38mm (with thread trimmer) 10～50mm (in case looper thread trimming device is removed)✽1 |
Work clamp type S, 16～24 (26) mm: optional Work clamp type M, 24～32 (34) mm: standard Work clamp type L, 32～40 (42) mm: optional |
Work clamp type S, 16～24 (26) mm: standard Work clamp type M, 24～32 (34) mm: optional Work clamp type L, 32～40 (42) mm: optional |
|
| The figures in ( ) parentheses are in case of taper bar | ||||
| Needle throwing width | 2～3.2mm ✽2 | 2.6～4mm ✽2 | 2～3.2mm ✽2 | |
| Taper bar length | 0mm, 3～15mm | |||
| Needle | DO×558 (Nm100) Nm90～Nm110 |
DO×558 (Nm120) Nm110～Nm120 |
DO×558 (Nm110) Nm110～Nm130 |
|
| Model name | MEB-3200TS |
|---|---|
| Thread trimming style | Shorter thread cutting without gimp |
| Sewing speed | 400～2,200rpm (100rpm step) |
| Sewing length | 10～34mm Compensating work clamp S, 24mm for eyelet buttonholes: standard |
| Needle throwing width | 2～3.2mm |
| Taper bar length | 0mm, 3～15mm |
| Needle | DO×558 (Nm100) Nm100～Nm110 |